Attention Matters - Hantech 10474165 Bedienungsanleitungen

1. Attention Matters

Warning matters:
— Do not use means to accelerate
the defrosting process or to clean,
other than those recommended by
the manufacturer.
— The appliance shall be stored
in a room without continuously
operating ignition sources (for
example: open flames, an operating
gas appliance or an operating
electric heater.).
— Do not pierce or burn.
— Be aware that refrigerants may not
contain an odour.
— Appliance shall be installed,
operated and stored in a room with
a floor area larger than 12 m2.
— Keep any required ventilation
openings clear of obstruction.
— Servicing shall be performed
only as recommended by the
manufacturer.
— The appliance shall be stored in
a well-ventilated area where the
room size corresponds to the room
area as specified for operation.
— Any person who is involved with
working on or breaking into a
refrigerant circuit should hold a
current valid certificate from an
industry-accredited assessment
authority, which authorises their
competence to handle refrigerants
safely in accordance with an industry
recognised assessment specification.
— Servicing shall only be performed
as recommended by the equipment
manufacturer. Maintenance and
repair requiring the assistance of
other skilled personnel shall be
carried out under the supervision
of the person competent in the use
of flammable refrigerants.
— All working procedure that affects
safety means shall only be carried
by competent persons.
Notes:
Û The air conditioning is only suitable
for indoor use, and is not suitable
for other applications.
Û Follow local grid interconnection
rules while installing the air
conditioning and ensure that it is
properly grounded. If you have any
question on electrical installation,
follow the instructions of the
manufacturer, and if necessary, ask a
professional electrician to install it.
Û Place the machine in a fl at and dry
place and keep a distance of above
50cm between the machine and
the surrounding objects or walls.
Û After the air conditioning is
installed, ensure that the power
plug is intact and fi rmly plugged
into the power outlet, and place
the power cord orderly to prevent
someone from being tripped or
pulling out the plug.
Û Do not put any object into the
air inlet and outlet of the air
conditioning. Keep the air inlet and
outlet free from obstructions.
Û When drainage pipes are installed,
ensure that the drainage pipes are
properly connected, and are not
distorted or bended.
Û While adjusting the upper and
lower wind-guide strips of the air
outlet, pluck it with hands gently to
avoid damaging wind-guide strips.
– 3 –