Maintenance - Hantech 10474165 Bedienungsanleitungen

Notes:
— Keep the drainage cover and the
water plug properly.
— During drainage, the body can be
tilted slightly backwards.
— If the water container cannot hold
all the water, before the water
container is full, stuff the water
outlet with the water plug as soon
as possible to prevent water from
flowing to the floor or the carpet.
— When the water is discharged, stuff
the water plug, and tighten the
drainage cover.
2. Continuous drainage (Optional)
(only applicable to dehumidifying
mode), as shown in figure:
— Unscrew the drainage cover, and
unplug the water plug.
— Set the drainage pipe into the
water outlet.
— Connect the drainage pipe to the
bucket.

7. Maintenance

Cleaning: before cleaning and
maintenance, turn off the machine and
unplug the plug.
1. Clean the surface:
Clean with surface of machine
with a wet soft cloth. Don't use
chemicals, such as benzene,
alcohol, gasoline, etc; otherwise,
the surface of the air conditioning
will be damaged or even the whole
machine will bedamaged.
Retaining screw
Wedging block
Wedging
block
– 12 –