Chord Close; Memory Function; Recording Function - Funkey DP-61 III Bedienungsanleitung

Chord Close

Press the [CHORD CLOSE] button to disable chord recognition.

Memory function

With the memory function, you can store your settings under four memory locations and
recall them specifically.
Press and hold the [MEMORY] button, then press one of the memory buttons [M1] - [M4] to
store the current settings (Tone, Style, Tempo) of the instrument. The memory data each
time replaces the data previously stored in the respective memory location.
Press one of the memory buttons [M1] - [M4] to directly recall the data stored in the
respective memory location.
Hint:
Memory data is erased when the instrument is turned off.

Recording function

You can record your melody play and then play it back.
Press the [REC] button to activate the recording function.
Now play the keyboard to start recording.
Press the [PLAY] button directly to complete the recording. Your recording is played back
immediately. Pressing the [PLAY] button again plays back the recording.
Press the [REC] button again to start a new recording. The previously saved data will be
overwritten.
Hint:
The maximum recording capacity is 180 tones.
The recording data is erased when the instrument is turned off.
The Program function lets you program a rhythm pattern.
Press the [PROG] button to activate this function. Now play the keyboard to enter percussion
sounds as drum beats.
Press the [PLAY] button directly to finish the input. The pattern is immediately played back in
a loop.
The [TEMPO] buttons can be used to adjust the playback speed.
20