iRobot Roomba Combo RVF-Y1 Bedienungsanleitung Seite 15

Washing the Bin
1
Remove the sponge filter and the high
performance filter from the tank.
Important:
Do not wash the high performance
filter. Remove the filter before washing the bin.
2
Rinse the dust bin and pre-filter under
running water.
3
Dry the dust bin completely
before reinstalling.
Cleaning the Main Brush
1
Turn the robot over and push down
both buttons on the brush frame to
remove the brush frame.
2
Remove the main brush.
3
Use the multi-function cleaning tool to cut
off and remove any hair tangled around
the main brush. Clean any tangled hair or
debris from the main brush.
Note: A multi-function cleaning tool is provided
for easy maintenance. Handle with care, this
cleaning tool has sharp edges.
Cleaning the Edge-Sweeping
Brushes
Remove the edge-sweeping brushes. Remove
any hair or debris tangled around the brushes
with the provided multi-function cleaning tool
and wipe with a clean cloth.
Roomba Combo™ Owner's Guide
EN
10