iRobot Roomba Combo RVF-Y1 Bedienungsanleitung Seite 10

Cleaning
EN
• To ensure the best performance, it is recommended to keep the
water tank attached to the robot during cleaning jobs, even when
mopping is not desired.
• When starting a cleaning job, the status indicator lights will blink
to indicate the cleaning navigation selected. When straight-line
cleaning navigation is selected, the status indicator lights will blink
from left to right. When reactive cleaning navigation is selected,
the status indicator lights will blink simultaneously.
• The CLEAN button on the robot stops glowing after the robot is
paused for more than 10 minutes. Press the CLEAN button on the
robot to wake up the robot.
• Your robot will return to the charging station at the end of a
cleaning job or whenever it needs to recharge.
5 For more information, visit global.irobot.com
Just Press CLEAN
Tap to Start/Pause/Resume
Tap twice to switch between
cleaning navigation patterns
Spot Clean
Your robot has a spot clean mode that can be accessed through
the iRobot Home App. This is applicable for an area of highly
concentrated dirt or dust. In spot clean mode, your robot will
spiral outward about 2 feet (0.6 meter) and then spiral inward to
end where it started.