iRobot Roomba Combo RVF-Y1 Bedienungsanleitung Seite 12

Mopping System
Your robot has an optional mopping system using a
washable microfibre cleaning pad and cleaning pad plate
attached to a proprietary tank. The washable cleaning pad
automatically damp mops the floor.
• Residual water may be present in the tank as a result of
EN
quality testing.
• Empty the tank and remove the cleaning pad plate before
cleaning on carpet. Be sure to replace the empty tank.
• When using the mopping system, fold area rug edges
under themselves so your robot will avoid the rug.
• After your robot finishes mopping, empty any remaining
water from the tank and replace the tank.
• Empty any remaining water from the tank and remove the
cleaning pad plate before charging your robot.
• If wetter mopping is desired, wet the cleaning pad before
attaching the pad to the cleaning pad plate.
Note: When the robot is operating with the mopping attachment,
only the straight-line cleaning navigation will be available.
Cleaning Solution
When mopping, you may
add Braava jet Hard Floor
®
Cleaning Solution to the tank
before adding water. This
product is a concentrate.
Important: Please visit the Help section in the iRobot Home App
for a list of cleaning solutions that can be safely used and won't
risk damage to your robot.
7 For more information, visit global.irobot.com
Retail: Full size
Retail: Full size
(Sold separately)
(Sold Separately)
4 capfuls
4 capfuls
per tank
per tank
1
Add water and cleaning
solution (optional) into the
tank.
2
Attach the cleaning pad and the
cleaning pad plate. Install the tank.