Measurement Settings - Lovibond TB 350 Gebrauchsanleitung

Samples containing excess bubbles
• Allow sample to stand for a minimum of five minutes.
• Gently invert sample two to three times to resuspend the turbidity.
• Place in instrument and proceed as instructed.
Other Notes
• Use of ultrasonic baths is not recommended. Ultrasonic energy can change particle
distribution.
• Use Fast Setting Mode for samples that have high concentrations of sands or particles
of high density.

4.4.4 Measurement Settings

Press the Settings Button to access the Measurement Settings Mode.
Icon Description
Mode
Location
Signal Avg.
Sample ID
not TB350
1)
EN TB 350
Option Function
Single Push to Read.
Continuous Measurement updates every X seconds
1)
until stopped.
Fast Settling Recommended for samples with rapid
settling characteristics.
Default Used if no Custom ID is set.
Custom Custom description of measurement
location and measurement limits.
On If on, can be set up to 255 measurements.
Function should be utilized if measurements
are unstable.
Off deactivated
Default Used if no Custom ID is set.
Custom Unique identifier of sample; user selectable.
4 Operation
EN
23