Balluff BNI PNT-508-105-Z067 Montageanleitung Seite 11

UL requirements
Power supply
The power supply has to be an isolated type or SELV type.
Cleaning
Clean the product only with dry cloth or cloth dampened
only with water!
Power Ratings
Power input, nominal – 130 mA maximum
rated voltage 24 V DC
– 16 A including all output loads
Power output, nominal – max. 16 A
rated voltage 24 V DC
Digital input, nominal – max. 30 mA/pin (point)
rated voltage 24 V DC
Digital output, nominal
rated voltage 24 V DC
Class A IO-Link-Port – 0.5 A/port (point) Pilot Duty
– 4 A/port (point) Resistive /
– 16 A or less per device
Class B IO-Link-Port – 0.5 A/port (point) Pilot Duty
(only on – Pin 2/5 fused, 1.2 A/port
BNI PNT-538-...)
– Pin 2/3 2 A/port (point)
– 8.8 A or less per device
consumption
General use
(point)
Cord Sizes
Power In cord assembly:
Listed or R/C (CYJV2/8) cord assembly with threaded
female M12 L-coded connector rated 24 V minimum, 16 A
minimum for all models. Cord Listed S, SJ, SO, ST, SV, or
R/C (AVLV2) marked or specified in UL style page as
suitable for external interconnection rated 300 V minimum,
14 AWG minimum unless marked with maximum load
current and overcurrent protection for the cord in
accordance with table below.
Power Out cord assembly:
Listed or R/C (CYJV2/8) cord assembly with threaded male
M12 L-coded connector rated 24 V minimum, 16 A
minimum for all models. Cord Listed S, SJ, SO, ST, SV, or
R/C (AVLV2) marked or specified in UL style page as
suitable for external interconnection rated 300 V minimum,
14 AWG minimum unless marked with maximum load
current and overcurrent protection for the cord in
accordance with table below.
Communication cord assembly:
Listed or R/C (CYJV2) cord assembly with threaded male
or female A, B, or D-coded, as applicable to mate with
item 9, M12 connector rated 24 V minimum, 1 A minimum.
R/C (AVLV2) marked or specified in UL style page as
suitable for external interconnection 28 AWG minimum,
300 V minimum cord.
In/Out cord assembly:
Listed or R/C (CYJV2) cord assembly with threaded male
A-coded M12 connector rated 24 V minimum, 2 A
minimum. R/C (AVLV2) marked or specified in UL style
page as suitable for external interconnection Cord rated
300 V minimum, 24 AWG minimum unless marked with
maximum load current and overcurrent protection for the
cord in accordance with table below.
Cord 14 14 16 18 20 22 24 26 28 30
conductor
size, AWG
Overcurrent 16 12 8 5.6 5
protection
maximum
ampere rating,
Amps
Maximum 16 9
load, Amps
3 2 1 0.8 0.5
8 5.6 4 2.4 1.6 0.8 0.6 0.4