Cleaning And Maintenance - hillvert HT-FORBES-15 Bedienungsanleitung

5. Cut what is left from the root as described in step 2 until you are
satisfied with the result.
Turning the machine off
1. Moving throttle to SLOW, reduce the engine rotations position, then
release safety lever to stop the engine
2. Make sure all moving parts have come to a complete standstill.
3. Apply the parking brake before releasing the machine handle
4. Turn the engine ON/OFF switch to OFF.
EMERGENCY STOP PROCEDURE
1. Immediately release the safety lever so that the engine stops.
2. Make sure all moving parts have come to a complete standstill.
3. Apply the parking brake.
4. Repair the malfunction and return to work.
3.4.

Cleaning and maintenance

a) Before adjusting, cleaning and maintaining the device, turn it off, wait at least
5 minutes or until it cools down, and then disconnect the spark plug wire.
b) Use only non-corrosive cleaners to clean the surface.
c) After cleaning the device, all parts should be dried completely before using it
again.
d) Store the unit in a dry, cool place, free from moisture and direct exposure to
sunlight.