Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
e)
Keep the device in perfect technical condition. Before each use check for
general damage and especially check for cracked parts or elements and for
any other conditions which may impact the safe operation of the device. If
damage is discovered, hand over the device for repair before use.
f)
Keep the device out of the reach of children.
g)
Device repair or maintenance should be carried out by qualified persons, only
using original spare parts. This will ensure safe use.
h)
To ensure the operational integrity of the device, do not remove factory-
fitted guards and do not loosen any screws.
i)
When transporting and handling the device between the warehouse and the
destination, observe the occupational health and safety principles for manual
transport operations which apply in the country where the device will be
used.
j)
Avoid situations where the device stops working during use due to excessive
loading. This may result in overheating of the drive elements and damage to
the device.
k)
Do not touch moving parts or accessories unless spark plug cable has been
disconnected and unit has cooled completely.
l)
Do not leave this appliance unattended while it is in use.
m) Clean the device regularly to prevent stubborn grime from accumulating.
n)
The device is not a toy. Cleaning and maintenance may not be carried out by
children without supervision by an adult person.
o)
It is forbidden to interfere with the structure of the device in order to change
its parameters or construction.
p)
Keep the device away from sources of fire and heat.
q)
Do not cover the ventilation openings!
r)
Protect the device against rain or moisture.
s)
Do not start the engine until the device is in the stump cutting position.
t)
Check if stumps have nails, wires, fence posts, other metal objects, stones,
and buried obstacles that could be thrown out or cause device's unexpected
movements when the blade encounters them. Contact the relevant services
to determine the exact location of electric wires, gas pipes, water pipes, etc.
before starting work with the device.
u)
Check if all covers are in place and in good condition. Check whether the
device's blade is damaged or teeth are missing. Replace the blade and other
parts as necessary.
v)
Make sure everyone nearby is aware of the danger zone associated with the
device (several meters directly in front of the device). Avoid the danger zone
whenever the device is in use. Nobody may be in the line of work of the
device.
w)
Make sure no one is working nearby the device before starting the engine or
moving the device.
Werbung
Inhaltsverzeichnis
