hillvert HT-FORBES-15 Bedienungsanleitung Seite 40

4. When you have finished cutting the roots, raise the cutting wheel so that
the centre of the wheel is just above the top of the stump.
5. Let the cutting wheel stop, release the brake and move the machine.
6. Apply the parking brake.
Cutting the entire stump
1. Make sure the throttle is set to FAST. In this position the cutting wheel
reaches the cutting speed.
2. Aim the saw blade at the stump, starting from the top corner of the
stump closest to you, and move it evenly over the stump left and right,
cutting approx. 1 cm of wood each time.
3. In between the movements, raise and lower the cutting wheel by
pressing and lifting the handle of the machine.
4. If necessary, move the machine forward and backward pushing and
pulling the handle. To move the machine, release the brake. Then, re-
engage the brake and continue cutting.