KingSmith WalkingPad WPS1F Benutzerhandbuch Seite 13

3. Instructions of manual mode control (primary mode)
Manual mode
In this mode, the speed of the WalkingPad can be controlled by the remote control. It
is recommended when beginners use the manual mode for first time and then use
the automatic mode after being skilled in using the WalkingPad. The manual mode
is controlled by remote control is used to start or stop the WalkingPad, which can
be modified in the client "Personalized".
Mode Switch
Short press: switch to automatic mode
Long press: switch to standby mode
Acceleration
Short press: increase speed by 0.5 km/h (0.5 mi/h)
Start/stop
Short press: start or stop the WalkingPad
Deceleration
Short press: reduce speed by 0.5 km/h (0.5 mi/h)
In the manual mode,
set as the intelligent
start and stop, the
WalkingPad will start
automatically to the
target speed while
entering this area.
13