Unpacking; Attachment / Before Starting The Equipment - Scheppach 5906218901 Original Bedienungsanleitung

L guaranteed sound power
WA
level / K uncertainty
Max altitude
Max working temperature
Type of spark plug
Type of fuel
Subject to technical changes!
Operating mode S1 (continuous operation)
The machine can be continuously operated with the
quoted power output.
Operating mode S2 (temporary operation)
The machine may be temporarily operated with the
quoted power output. Afterwards the machine must be
stopped for a while to prevent it from overheating.
Noise
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A), please
wear suitable hearing protection.
7.

Unpacking

m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
• Open the packaging and remove the device care-
fully.
• Remove the packaging material as well as the pack-
aging and transport bracing (if available).
• Check that the delivery is complete.
• Check the device and accessory parts for transport
damage.
• In case of complaints the dealer must be informed
immediately.
• Subsequent complaints will not be accepted. If pos-
sible, store the packaging until the warranty period
has expired.
• Read the operating manual to make yourself familiar
with the device prior to using it.
• Only use original parts for accessories as well as for
wearing and spare parts. Spare parts are available
from your specialized dealer.
90 dB(A) / 2 dB(A)
1000 m
40°C
F6RTC / F6TC
Unleaded Gasoline,
or 90 Octane (E5)
www.scheppach.com
• Specify our part numbers as well as the type and
year of construction of the device in your orders.
8. Attachment / Before starting the
equipment
m Important!
You must fully assemble the appliance before using it
for the first time!
Mounting the measuring cup (10) (fig. 2 + 3)
Open the tank cap (2) and remove the measuring cup
(10). Then insert the measuring cup into the hole at the
bottom of the tank cap.
Electrical safety:
• Electric supply cables and connected equipment
must be in perfect condition.
• The generator is to be operated only with equipment
whose voltage specifications conform with the gen-
erator's output voltage.
• Never connect the generator to the power supply
(socket-outlet).
• Keep the cable length to the consumer as short as
possible.
Connecting to earth (fig.4)
The housing is allowed to be connected to earth in or-
der to discharge static electricity. To do this, connect
one end of a cable to the earth connection on the gen-
erator and the other end to an external earth (for exam-
ple an earthing rod).
Before starting the equipment
• Check the fuel level and top it up if necessary
• Make sure that the generator has sufficient ventila-
tion
• Make sure that the ignition cable is secured to the
spark plug
• Inspect the immediate vicinity of the generator
• Disconnect any electrical equipment which may al-
ready be connected to the generator
Important! Before using the appliance for the first time
the tank must be filled with a petrol mixture in a mixing
ratio of 1:40 (1 part oil to 40 parts petrol). To do so, use
the measuring jug inside the tank (fig.10). Shake the
petrol mixture before filling into the tank.
GB | 23