Unpacking; Before Commissioning - Scheppach BSG500 Original Bedienungsanleitung

Working conditions
Air humidity
Operating
temperature
General
Protection class
Dimensions
Weight
Technical changes reserved!

7. Unpacking

• Open the packaging and carefully remove the device. Remove the packaging material, as
well as the packaging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport damage.
• In the event of complaints the carrier must be informed immediately. Later claims will not
be recognised.
• If possible, keep the packaging until the expiry of the warranty period. Familiarise yourself
with the product by means of the operating instructions before using for the first time.
• With accessories as well as wearing parts and replacement parts use only original parts.
Replacement parts can be obtained from your dealer. When ordering please provide our
article number as well as type and year of manufacture for your equipment.
m ATTENTION!
The device and the packaging material are not children's toys! Do not let children
play with plastic bags, films or small parts! There is a danger of choking or suffo-
cating!

8. Before commissioning

On/off switch (5)
Switching on: Short press the on/off button, the power indicator lights and the LCD screen
lights up.
Switching off: Press and hold the on/off button over 2 seconds. The indicator and the LCD
screen will be off.
 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58
5% - 90%
0°C - 40°C
IP20
287 x 176 x 253 mm
6.7 kg
GB | 29