Cleaning, Maintenance And Ordering Of Spare Parts; Disposal And Recycling; Cleaning The Filters; Ordering Replacement Parts - EINHELL TE-VC 18/10 Li - Solo Originalbetriebsanleitung

7. Cleaning, maintenance and
ordering of spare parts
Hazard!
Always pull out the battery pack before starting
any cleaning work.
7.1 Cleaning
•
Keep all safety devices, air vents and the
motor housing free of dirt and dust as far as
possible.
•
We recommend cleaning the equipment im-
mediately each time after use.
7.2 Cleaning the equipment head (Fig. 1)
Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plas-
tic parts in the equipment.
7.3 Cleaning the tank (Fig. 1)
The tank can be cleaned with a damp cloth and
some soft soap or under running water, depen-
ding on the amount of dirt.
7.4 Cleaning the fi lters
Cleaning the foam fi lter and the additional
fi lter (Fig. 2)
Clean the foam fi lter (14) and the additional fi lter
(16) with a little soft soap under running water and
allow them to air-dry.
7.5 Maintenance
At regular intervals and before each use, check
that the fi lters in the wet/dry vacuum are securely
fi tted.

7.6 Ordering replacement parts:

Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.Einhell-Service.com
Anl_TE_VC_18_10_Li_Solo_SPK13.indb 17 Anl_TE_VC_18_10_Li_Solo_SPK13.indb 17
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original pa-
ckaging.
- 17 -
27.04.2022 09:18:16 27.04.2022 09:18:16