Installation - Klarstein MISTRAL Bedienungsanleitung

INSTALLATION

Note: Assemble the stand as described below.
It is strictly forbidden to use the appliance if it has not been properly assembled.
Remove the two stand parts and the unit casing from the packaging. Rotate
the two stand sections along the semi-circular positioning slot until they are at
the same level as the lower level and the clips are engaged on both sides. The
assembly of the stand is now complete.
Semicircular
positioning slot
Clamp
opening
Clamp
Semicircular
positioning slot
Clamp
Clamp opening
Secure
the brackets
Secure
the brackets
EN
21