Warning and Error Messages
Charging is disabled if the charger entered into DC power
supply mode.
The voltage difference is higher than 300mV between the
highest and the lowest one.
The internal temperature of the unit goes too high.
The battery capacity is more than the maximum
capacity which the user has set.
The charging time is longer than the maximum
charging time which the user has set.
The battery voltage is higher than the maximum voltage which the
user sets when charging in balance mode.
DC MODE DISAGREE
A
CHARGE
BALANCE VOLT DIFF
A
TOO HIGH
A
INT. TEMP. TOO HI
OVER CHARGE
A
CAPACITY LIMIT
A
OVER TIME LIMIT
A
BATTERY WAS FULL
33