Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Pb Lead-Acid Battery Program
Pb COLD CHG
A
1.5A 12.0V (6P)
Pb COLD CHG
A
1.5A 12.0V (6P)
BATTERY CHECK
A
.............
P-6 1.5A 12.56V
A
CHG 055:10 01464
[END: FINISH]
A
13.56V 14260mAh
[TIME:04:45:32]
A
13.56V 14260mAh
Additional Pb Process Information:
During the Pb battery charging/discharging process, the RDX2 Pro can display a variety of
information. Turn the Jog Dial and you can also view the following information:
CAPACITY CUT-OFF
A
ON 15000mAh
IN POWER VOLTAGE
A
15.8V
SAFETY TIMER
A
ON 300MIN
INT. TEMP 94
A
Pb COLD MODE: Press the ENTER button and the amp value
will begin flashing. Turn the dial to the desired charge rate.
*FLASHING
Press the ENTER button again and the nominal battery pack
voltage will begin flashing. Turn the dial to set the voltage
and the number of cells.
Press and hold the Jog Dial ENTER for 3 seconds to start
charging.
Once charging has commenced, the charger will display the
following real-time information: battery type, cell count,
charging current, battery voltage, elapsed time and charged
capacity.
When charging is complete, the screen will read "END: FINISH"
and the charger will emit an audible "ring" sound.
Capacity cutoff setting
Input voltage
Safety timer setting
0
F
Internal temperature
23
Werbung
Inhaltsverzeichnis
