Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.5 Muting the zones 1 to 7
To mute the signal of the zones 1 to 7 during operation, press the button MUTE. The red control LED lights
up and the green control LEDs of the corresponding zones extinguish.
6.6 Operation with two units connected in series in 2/7 mode
1. On each unit, use the rear address selector switch to define which unit is to be operated as master unit
and which as slave unit.
2. On each unit, use the button MASTER/SLAVE to select which unit can be controlled by the remote
control, the master unit or the slave unit.
3. Both units still operate independently, i.e. activating a channel or a function on a unit does not affect the
other unit.
7. CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
8. TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Rated power:
Connectors:
Remote control:
Coverage:
Dimensions (LxWxH):
Weight:
8.1 Accessories
Y-cable for OMNITRONIC LUB-27
IR-extension for OMNITRONIC LUB-27
Please note: Every information is subject to change without prior notice. 19.02.2010 ©
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
100 - 240 V AC, 50/60 Hz ~,
via supplied power unit 12 V/1.5 A
30 W
25 A per channel
pairs of screw terminals
2 x 1.5 V micro batteries (type AAA)
10 m
482 x 220 x 78 mm (19", 2 U)
3.2 kg
No. 10453008
No. 10453009
28/28
00048166.DOC, Version 1.0
Werbung
Inhaltsverzeichnis
