System Reset - PERFECTPRO WORKTUBE Bedienungsanleitung

SYSTEM RESET

If the radio fails to operate correctly, or some digits on the display are missing or incomplete, carry out the following procedure.
1. Press the ON/OFF button to switch on the radio.
2. Press the MENU/PRESET button, and then TUNING ◄◄ or ►► button until the display shows "System settings".
3. Press the SELECT/INFO/BT ST button; then the TUNING ◄◄ or ►► button until the display shows "Factory Reset".
4. Press the SELECT/INFO/BT ST button.
5. Press the TUNING ◄◄ or ►► button to select "Yes" if you wish to reset the radio, otherwise, select "No" .
6. Press the SELECT/INFO/BT ST button to confirm your choice.
7. A full reset will be performed. All presets and the station list will be erased. All settings will be set to the default values. The radio
will start up and the display will show "PerfectPro" for a few seconds. Then the radio will automatically perform an auto scan of
the Band III DAB channels and the FM band. The display will show "Scanning" in DAB and "Auto" in FM.
8. When the scan is completed, the 10 strongest FM stations will be stored as preset. The radio will switch to standby with the
updated clock and date showing on the display.
In case of malfunction due to electrostatic discharge; reset the product as above to resume normal operation. If you are not able to
perform the reset operation as above, remove and reconnect all batteries and the power supply.
Under the environment with Conducted Immunity disturbance / Radiated Immunity, the sample may malfunction. It will automatically
recover to normal when the Conducted Immunity disturbance / Radiated Immunity stopped.
KEY LOCK
The radio supports Key Lock function in all the Standby, DAB, FM and Aux-in modes.
1. Pressed and hold SOURCE/LOCK button for about 3 seconds, the LCD will display "Locked".
2. When keys are locked, the functions of the radio will be temporary disabled until it has been unlocked. During this moment, the
radio would only brighten the backlight for a few seconds and showing "Locked" in display.
3. Pressed and hold the SOURCE/LOCK button for 3 seconds again, the radio would display "Unlocked", and the key lock
function will be disabled.
Noted: When the radio is in standby and powered by batteries, some of the buttons were not be able to brighten the radio's backlight
in order to save energy.
27
WARRANTY
This radio has a 2 year limited warranty.
WARNING ! Warranty becomes void once the radio cabinet has been opened or any modifications or alterartions to the
radio have been made !
The terms of the warranty of this radio do not cover the following:
- Damage caused by misuse, abuse, neglect, alterations, accidents or unauthorised repair.
- Normal wear and tear.
- Breaking or bending of the antenna.
- Batteries, being consumables, do not fall under the warranty conditions of the radio.
GB GB
28