Operations In Bluetooth Stereo Pairing Mode; Disconnect From Stereo Pairing Mode; Bluetooth Capabilities; Volume & Sound - PERFECTPRO WORKTUBE Bedienungsanleitung

Note: If the Bluetooth audio on the right speaker is not synchronised to the audio of the left speaker, there could be some
interference from the environment. It is recommended to press briefly the ON/OFF button once to put both radios into standby
mode. Then press each of the ON/OFF buttons on the radios to improve the audio synchronisation again.
Note: The audio from DAB, FM Bluetooth and Auxiliary Input will be streamed to both of the paired speakers.
Note: After paired two Worktube radios into Stereo Pairing Mode, the left speaker with icon will only play left audio channel, and the
right speaker with icon will play right audio channel only.
Note: The distance between the Left speaker and the Right speaker is recommended in two metres for stable audio streaming
performance.
Note: In Stereo Pairing Mode, only 1 speaker (Left speaker) can be seen on the Bluetooth device.
Note: In Stereo Pairing Mode, only the Left speaker can be used as the Aux in audio source. Plug in the Aux in jack on the Right
speaker is ignored.
Note: The Stereo Pairing Mode audio is streamed wirelessly. There can be interferences from WiFi, cellular mobile signal,
microwave oven, Bluetooth or more. The Worktube radios will try to automatically improve the quality of connection.

OPERATIONS IN BLUETOOTH STEREO PAIRING MODE

In Stereo Pairing Mode, you can operate the paired speakers on either one of them. You can adjust audio volume and power off
them on either Left or Right radio, another paired speaker will follow your operations.

Disconnect from Stereo Pairing Mode

When two Worktube radios are paired into Stereo Pairing Mode, press and hold the SELECT/INFO/BT ST button of either one of
the Worktube radios to deactivate Stereo Pairing Mode.
21

Bluetooth capabilities

Bluetooth connectivity performance may vary depending on the connected Bluetooth devices. Please refer to the Bluetooth
capabilities of your device before connecting to your speaker. All features may not be supported on some paired Bluetooth devices.
Your speaker supports AVRCP (Audio Video Remote Control Profile) which allows your speaker to control music playback from the
connected device.
Human bodies, brick and concrete walls, heavy furniture or bookcases will all reduce the operational range of your Bluetooth devices
to a greater or lesser extent. Glass, dry-wall or wood paneled walls and office partitions may have a less severe but noticeable
effect. Metal pipes, foil-lined plasterboard, metal window frames and domestic wiring can also have an effect. You should position
your Bluetooth devices closer to each other if you observe communication difficulties.
WiFi networks and cordless phones generally use similar radio frequencies to Bluetooth and may interfere with one another. If any
interference is noticed, then try relocating the speaker or one of the other devices.
The Bluetooth capabilities of your speaker enable it to receive audio from many Bluetooth capable devices including mobile phones,
personal computers and tablets. Normally only one Bluetooth device can be connected to your speaker at a time.
VOLUME & SOUND
To adjust the volume, simply press the VOLUME – or + button when playing the DAB / FM radio / BLUETOOTH / AUX IN mode.
The level of volume (from 00 to 40 the loudest) will be shown on the LCD Display.
Note: When playing on batteries; if the energy level of the batteries is too low, sound will distort on higher volume.

360 degrees sound

The unique Neodymium speaker located on top of the radio provides a 360 degrees sound image.
Suggestion: If preferred, place the radio in a corner or close to a wall for additional sound reflection.
GB GB
22