Battery Status Display (Illustration U4 ); Troubleshooting; Possible Cause - Sabo SAU15033 Betriebsanleitung

– When the charger shows that the battery is fully charged, it can be removed from the charger (see also
chapter "Useful life").
– Unplug the charger when not in use.
– To check the available charge, press the battery charge display button (see chapter "Battery charge
display").
Checking the charger
If the battery is not charged properly:
– Check the socket using another electrically operated tool e.g. reading lamp or similar, which you know to be
working correctly.
Make sure that the socked is not switched off.
– Check whether the charging contacts have not short-circuited due to dirt or objects.
– Heed the permissible temperature range of 7° C to 40° C during charging

Battery status display (Illustration U4 )

To check the available charge, press the battery charge display button. The display lights illuminate according to
the charge level of the battery:
Lights
4 green lights
3 green lights
2 green lights
1 green light
Lights are off

7 TROUBLESHOOTING

Fault
Battery cannot be
charged
Capacity
Battery is fully charged
Battery is 70% charged
Battery is 45% charged
Battery is 10% charged and must be
recharged soon.
Battery is less than 10% charged and
must be recharged immediately in order
to prevent irreparable damage (deep
discharge).

Possible cause

Charging contacts short-
circuited by dirt or
objects.
Battery or charger faulty
Charger without power
supply
Battery too hot
Remedy
Have it checked by an
authorised workshop.
Replace battery or charger.
Use another electrically
powered device to check
whether the socket is OK.
Allow the battery to cool
down for about 30 minutes.
39