Led Display On The Charger; All Models - Sabo SAU15033 Betriebsanleitung

LED display on the charger

SAU15033
LED 1
illuminates
red
illuminates
red
illuminates
red
illuminates
red
illuminates
red
SAU16509
LED 1
illuminates
red
illuminates
red
illuminates
red
flashes red
flashes red

All models

What to do if there is an error display
– If the charger shows an error after the battery has been inserted, remove the battery and insert it again after
about 1 minute.
If the charger no longer shows an error, the battery is OK.
– If the charger still shows an error, remove the battery and unplug the charger. Reconnect the charger to the
mains supply after roughly 1 minute and reinsert the battery.
If the charger no longer shows an error, the battery is OK.
– If the charger still shows an error, the battery is defective and must be replaced.
LED 2
illuminates
Battery charging
red
illuminates
Battery is fully charged.
green
Battery is too warm
illuminates
(remove and leave to cool
orange
for about 30 minutes)
off Readiness
Error (see also chapter
flashes
"What to do if there is an
red
error display")
LED 2
off
flashes
green
illuminates
green
off
flashes
green
38
Meaning
Meaning
Readiness
Battery
charging
Battery is fully
charged
Battery is too
warm (remove
and leave to
cool for about
30 minutes)
Error (see
also chapter
"What to do
if there is an
error
display")