Fm Radio Mode - Sharp DR-P420 Bedienungsanleitung

• Signal strength - An empty
display to indicate the minimum signal strength
for acceptable listening. The row of solid rectangles
indicates the actual signal strength that you are
receiving.
• Program type (PTY) – e.g., 'Rock' , 'Pop' , 'Talk' or 'News'
• Multiplex name - Displays the broadcasting area
and collection of radio stations on this frequency
e.g., BBC National DAB, Digital 1 Network
• Channel and frequency – e.g. 12B 225.648 MHz
(Channel=12B, Frequency=225.648 MHz)
• Signal error - This is displayed as a number between
0-99. To satisfactorily listen to a radio station, the
signal error must be below 30. Adjust the aerial or
relocate your radio to improve reception.
• Signal information - The data rate at which the
signal is being transmitted.
• Power indicator – displays <USB Power> when
powered by USB; displays <Battery XX> where XX
is the battery charge available.
• Time
• Date
will appear on the
Dynamic range control (DRC)
DRC data is not transmitted by all broadcasters. DRC
is used for controlling difference between the loudest
and quietest sounds. e.g., in a noisy environment,
setting the DRC to maximum makes quiet sounds
comparatively louder, and loud sounds quieter.
There are 3 levels of compression:
• DRC off - no compression. This is the default
setting.
• DRC low - medium compression
• DRC high - maximum compression
In DAB mode, long press
and select <DRC> and then select your preference.
Note: The current DRC setting will have an asterisk (*)
in the display.

FM radio mode

To change to FM mode, short press
radio displays <FM>. If you were listening to an FM
station when you switched the radio off, this station
EN
. Use to scroll
until the