DeWalt DWC410 Handbuch Seite 29

wrench or a key left attached to a rotating
part of the power tool may result in personal
injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.
4) POWER TOOL USE AND CARE
a) Do not force the power tool. Use the
correct power tool for your application.
The correct power tool will do the job
better and safer at the rate for which it
was designed.
b) Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the switch
is dangerous and must be repaired.
c) Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
d) Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool's operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
g) Use the power tool, accessories and
tool bits etc., in accordance with these
instructions taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
5) SERVICE
a) Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Additional Specifi c Safety Rules for
Wet Tile Cutter
• Always use guard provided with the tool.
The guard must be securely attached to the
power tool and positioned for maximum
safety, so the least amount of blade is
exposed towards the operator. Position
yourself and bystanders away from the plane
of the rotating blade. The guard helps to
protect operator from broken blade fragments
and accidental contact with the blade.
• The rated speed of the blade must be at
least equal to the maximum speed marked
on the power tool. Blades running faster than
their rated speed can break and fly apart.
• Blades must be used only for recommended
applications. For example: do not grind with
the side of cut-off blade. Abrasive cut-off
blades are intended for peripheral grinding, side
forces applied to these blades may cause them
to shatter.
• Keep hands away from cutting area and
blade. Keep your second hand on auxiliary
handle or motor housing. If both hands are
holding the saw, they cannot be cut by the
blade.
• Do not reach underneath the workpiece.
The guard cannot protect you from the blade
below the workpiece
• Never hold piece being cut in your hands
or across your leg. Secure the workpiece to
a stable platform. It is important to support
the work properly to minimize body exposure,
blade binding, or loss of control.
• Hold power tool by insulated gripping
surfaces when performing an operation
where the cutting tool may contact hidden
wiring or its own cord. Contact with a "live"
wire will also make exposed metal parts of the
power tool "live" and shock the operator.
• Always use blades with correct size and
shape (diamond versus round) of arbor/bore
holes. Blades that do not match the mounting
hardware of the saw will run eccentrically,
causing loss of control.
EN G LI SH
27