Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
purchasing your paint.
To obtain the best results, keep your spray gun
level and parallel to the surface at all times.
Keep the nozzle 25 - 30 cm from the surface and
spray evenly from side to side or up and down. Do
not spray at an angle as this will lead to paint runs
on the surface. Use smooth and even strokes.
It is essential that the spray gun is cleaned
thoroughly after every use. Failure to clean it will
almost certainly result in blockages and it may not
operate when you next come to use it! The
guarantee does not cover cleaning a sprayer that
has not been properly cleaned by the user.
Trouble shooting
•
Spray gun does not spray / blow gun does
not blow.
•
Check the valve, cylinder and needle of the
nozzle on blockage
•
Check the air hose on leakage
•
Check the air pressure
•
"Orange Skin" excessive fogging.
•
Incorrect solvent is used
•
Use correct solvent.
•
Spray gun too far from the surface.
•
Hold spray gun closer to the object.
•
Paint too thick
•
Thin the paint
Faults
Should a fault occur, e.g. after wear of a part,
please contact the service address on the
warranty card.
Environment
To prevent damage during transport, the appliance
is delivered in a solid packaging which consists
largely of reusable material. Therefore please
make use of options for recycling the packaging.
Guarantee
For the conditions of guarantee, please refer to the
separately provided guarantee card.
Ferm
FARBSPRITZPISTOLE
Vor Gebrauch eines Geräts die
Bedienungsanleitung und
Sicherheitsvorschriften für das
Druckluft-Werkzeug und den
Kompressor lesen.
Inhalt
1. Gerätedaten
Technische Daten
Betriebsdruck
Düsendurchmesser
Maximale Fördermenge
Material Becher inhalt
Gewicht
2. Sicherheit
Erläuterung der Symbole
In dieser Anleitung und/oder auf dem Gerät
werden folgende Symbole verwendet:
Schutzhandschuhe tragen
Bei der Arbeit eine Spritzmaske tragen.
Schutzbrille tragen.
Sicherheitsvorschriften
Immer die Anleitungen zum
Kompressor und den anderen
verwendeten Objekten und Werkstoffen
lesen.
•
Überdruck vermeiden.
•
Den Strahl nie auf Sie selbst oder andere
Personen richten. Dies kann ernsthafte
DE
1.5 mm
750 ccm
0.65 kg
3
Werbung
Inhaltsverzeichnis
