Installing The Unit - Oase AquaMax Eco Twin 20000 Gebrauchsanleitung

Installing the unit

• Place the pump horizontally on a stable, mud-free surface.
• Ensure secure and stable positioning of the pump.
• Only operate the pump when it is fully submerged.

The pull rope allows you to simply pull the pump from the water.
− Fasten the pull rope on the bottom filter casing through the round openings and make a
knot.
Install the receiver
NOTE
The receiver will be damaged if it is constantly subjected to moisture.
 Install the receiver in a moisture-protected location.
 If necessary, use a protective cover.
• Position the receiver in a flood-protected location at least 2 m from the edge of the pond.
• Fasten it to the ground with the ground stake or suspend it vertically using 2 screws.
– Do not operate the receiver while it is in a horizontal position, only operate it in a vertical
position with the ground stake intake pointing down.
Do not plug the power plug into the socket yet!
EN
AMX0115
AMX0119
27