Lupine WILMA R Bedienungsanleitung Seite 20

Special functions
Adjusting the low-battery warning LEDs:
Use this program to adjust the onset of the low-battery warning.
1.
Press and hold the button for until 4 green
release the button.

2.
The threshold can be selected as shown below.
Lamps backlight and remote:
red
6.2 V
6.4 V
Factory setting
6.6 V
6.9 V
7.1 V
Recover factory settings:
1.
Press and hold the button until 5 red
release the button.

2.
Disconnect the battery, and all factory settings will be restored.
3 8
LEDs light up.
red
blinking
5.8 V
6.0 V
6.2 V
6.5 V
6.8 V
LEDs turn on.
Charging:
Plug the included Wiesel charger into an outlet and connect it to the battery.
Charging starts automatically. Depanding on the version, the control-LED can go red or only green.
The battery can be left plugged into the charger for an indefinite period. Although this will not dama-
ge the battery, it is not advisable for Li-Ion batteries since they do not require conservation charging.
LED display:
LED red on: charging
LED green on: battery is fully charged
 Warning! This charger is to be used to charge rechargeable Li-Ion batteries only.
It is NOT suitable for charging NiMH batteries!
 Do NOT use non-rechargeable batteries. – Risk of explosion!
 This charger may be opened ONLY by the manufacturer!
USB Charger
With the USB Charger, you can charge your Lupine batteries easily via a mobile phone power supply,
solar panel, or the USB port of your PC. (Art. No. 1444)
Charger
39