Avionaut AeroFIX Bedienungsanleitung, Garantie Seite 65

• Test the correct installation of the child safety
seat. If one of the LEDs lights up red, correct the
seat installation and perform the test again. Do
this until the green LED lights up,
• Make sure that you can place a maximum of one
finger between the harness and the child (1cm). If
this distance is greater, tighten the harness,
• Check if the headrest is set to the correct height,
• When the child safety seat is facing backwards
to the driving direction, it must be set in a lying
position,
• The Avionaut AeroFIX child safety seat is not
intended for home use. Use it only in a car,
• We recommend regularly checking that the
elements made of expanded polystyrene (EPS)
and energy-absorbing materials in the headrest
(EPP) have not been damaged.
Maintenance and hygiene
1. The upholstery of the Avionaut AeroFIX
child safety seat can be machine washed at
temperatures up to 30°C at speeds up to 600
rpm.
2. Other elements of the safety seat can be washed
with soap and a soft sponge.
3. Keep your child safety seat clean. Do not use
any moisturising agents or aggressive cleaning
agents.
4. Do not use any lubricants, harsh chemicals or
moisturisers for moving parts or other parts of
the seat.
Environment
• Keep plastic packaging parts out of reach of the
child to avoid the risk of suffocation,
• The batteries powering the information panel
placed in the base of the child safety seat are
subject to proper disposal.
• For reasons of environmental protection,
after using the seat, please dispose of it in the
appropriate waste management facility, in
accordance with applicable local regulations.
Questions
If you have any questions, call your seller or au-
thorised distributor. Prepare the following infor-
mation:
— The age, height and weight of your child,
65