Installing The Software - Epson EMP-9300 Kurzanleitung

"EPSON Projector Software for Multi Screen" CD-ROM (EMP-9300 only)

Installing the software

Turn on the computer's power, start Windows, and then place
1
the accessory "EPSON Projector Software for Multi Screen"
CD-ROM into the computer's CD-ROM drive.
The installer will start automatically.
Tip :
If the setup program does not start up automatically, click [Start], click [Run] to open
the [Run] dialog box, type the drive letter of the CD-ROM drive followed by
":\EMPMSA\SETUP.exe" in the [Run] box, and then click [OK].
Click the [Next] button.
2
The installation begins. Proceed as instructed by the screens that follow.
The following screen will appear when the installation is
3
complete.
When installation is complete, click the [Finish] button.
After installation, use the following procedure to view the "EMP Multi
Screen Adjustment Operation Guide".
8