Replacing The Lamp; Environmental Concerns - AEG DGB3523S Benutzerinformation

To replace the charcoal filter:
1. Remove the grease filters from the
appliance.
Refer to "Cleaning the grease filter" in
this chapter.
2. Turn the filter counterclockwise (1)
and then pull (2).
To mount the filters back follow the steps
in reverse order.
In any case, it is necessary to replace
the filters at least every four months.

4.4 Replacing the lamp

WARNING!
Risk of burns and electric
shock! Disconnect the
appliance from the electricity
before the operation! Make
sure that the light bulb has
cooled down before touching
it.

5. ENVIRONMENTAL CONCERNS

Recycle materials with the symbol
Put the packaging in relevant containers
to recycle it. Help protect the
environment and human health by
recycling waste of electrical and
electronic appliances. Do not dispose of
Replace the burnt light bulb in
accordance with the specifications:
1
2
To replace the lamp:
1. The lamp cover has two slots on
2. Replace the lamp.
3. Mount the lamp cover.
appliances marked with the symbol
.
with the household waste. Return the
product to your local recycling facility or
contact your municipal office.
WARNING!
Risk of injury! Use protective
gloves to replace the lamp.
Risk of damage to the
appliance! Do not use sharp
edged tools!
Power (W)
Socket
Voltage (V)
Dimensions (mm)
ILCOS D Code (ac‐
cording IEC 61231)
each side (1). Use a flat non sharp
plastic tool. Gently remove the lamp
cover from the appliance (2).
ENGLISH 27
4
E14
220 - 240
37 x 100 (diameter
x length)
DRBB/F-4-220-240-
E14-37/100