Setting - Gastrodomus EFP632V Bedienungs- Und Wartungsanleitung

2.2 SETTING

A B
Fig.4
START-UP
- use the main switch to switch on the appliance.
- Turn knob A to position "1" (6000w) or to position "2" (9000w)
- Turn knob B to set temperature.
- AVOID OVERHEATING OIL.
When the green light comes on, the appliance is ready for use. The orange light remain lighted whilst the heating
elements are heating up the oil. As soon as the oil reaches the set temperature the heating elements switch off and the
orange light goes out.
When the temperature falls below the set level the heating elements come on again automatically.
SWITCH-OFF
- Turn knob B to position "0".
- Turn knob A to position "0".
- If the appliance is not used, switch off the circuit breaker.
- Place the lid on the frying compartment/frying compartments.
DRAINING THE OIL
In order to drain the basin of the used oil, allow the oil to cool, fit a drainage extension with bayonet clutch is foreseen, fit
one oil collection basin, and open the drain cock. The oil is discharged through the cock and the basin empties. To keep
the oil at its best, it is advisable to leave it in a cool place once it has been filtered.
Pag. 10