Herunterladen Inhalt Inhalt Diese Seite drucken

BOMANN WA 7191 Bedienungsanleitung, Garantie Seite 33

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Below listed parameter, with the exception of the values for the "eco 40-60" program, are only guide values:
Program
Selected
Cotton
60
-
eco 40-60
-
-
Mix
40
Express 15'
40
20°C
20
General information to the program table!
 The program „eco 40-60" is able to clean normally soiled cotton laundry washable at 40°C-60°C, together
in the same cycle. The program is used to check compliance with EU ecodesign legislation.
 The most efficient programs in terms of energy and water consumption are generally those that perform at
lower temperatures and longer duration.
 Loading the household washing machine or household washing-dryer up to the capacity specified for the
respective programs helps saving energy and water.
 Noise emissions and residual moisture are influenced by the spin speed: the higher the spin speed in the
spin cycle, the higher the noise emissions and the lower the residual moisture.
Wash temperature
Select the temperature corresponding to the textiles
and pollution. Basically: the higher the temperature,
the higher the power consumption.
95°C : Heavily soiled pure white cotton or linen (e.g.
tablecloths, sheets and towels).
60°C : Moderately soiled colored cotton, linen and
synthetic (e.g. shirts or underwear). Slightly soiled
whites (e.g. underwear).
cold_20°C_30°C_40°C : Normally soiled laundry
(including synthetic and wool).
Capacity
Do not overload the appliance otherwise the laundry
is not getting clean. Refer to the information in the
"Program table".
Temp. °C
Loading
kg
Reached
57
≤9.0
45
≤9.0
35
≤4.5
27
≤2.5
36
≤4.0
37
≤1.0
20
≤9.0
Water-
Time
consump.
h:min.
L/cycle
2:38
67
3:48
69.5
2:54
51.2
2:54
27.1
0:59
58
0:30
18
1:48
66
Starting the program
 Connect the appliance to the power supply and
switch it on.
 The water supply must be opened to the maxi-
mum pressure.
 Load your laundry and fill in the detergent, if nec-
essary.
 Close the appliance door properly.
 Set the required washing conditions.
 Start the operation.
Appliance door lock
Once a wash program has been started, the appli-
ance door cannot be opened.
When the wash cycle is finished, the door lock will
automatically be unlocked.
33
Energy-
Spin
consump.
speed
kWh/cycle
rpm
1.44
1400
1.30
1400
0.75
1400
0.40
1400
0.58
1400
0.31
800
0:25
1400
average
remaining
moisture
%
51
50
52
52
55
55
50

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis