Preparing The System - Cardin Elettronica ZVL556.00 Handbuch

All manuals and user guides at all-guides.com
Transmitter versions
TXQ504C2
TXQ504C4
TXQPRO504C4
TXQPRO504C4A
Receiver versions
RCQ504D1
Memory module MCC24LC64
The module is furnished with a none-volatile EEPROM type memory and contains the transmitter
codes and allows you to memorise up to 1000 codes. The programmed codes remain stored even
in the absence of power.
Attention! Removing and inserting the memory module must be carried out when the receiver is
switched off otherwise the memory content could become corrupt.

PREPARING THE SYSTEM

To obtain the best results from the radio control system the aerial installation site should be carefully
chosen. 'Range' is intended to mean the working distance, measured in free space, between the
receiver and the transmitter with the aerial installed.
The range is therefore closely linked to the technical characteristics of the system and varies accord-
ing to the characteristics of the site in which the system is located.
For best performance we advise you to use the Cardin ANS400 aerial. Wire the aerial to the receiver
using a coaxial cable RG58 (impedance 50Ω) with a maximum length of 15 m.
Miniaturized transmitters
Miniaturized transmitters
Industrial transmitters
Industrial transmitters + external aerial
Outdoor receiver with display
15
2 buttons
4 buttons
4 buttons
4 buttons
4 channels