Rating Plate; Operation And Handling; Before First Use; Preparations - CASO DESIGN Classico T 2 Original Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

13.2 Rating plate

The rating plate with the connection and performance data can be found beneath the

device.

This chapter provides you with important notices with regard to operating the device.

Observe the following notices to avoid dangers and damages.

► Do not leave the device unsupervised during operation.

► Never use metal utensils to remove food that may be stuck! For example, you can use a

blunt wooden stick, such as a brush handle. Do not touch the heating elements!

► Do not use bread slices that are too thick or too large, as these can easily jam and then

burn.

1. Remove all packaging material. In particular, make sure that the packaging material

inside the bread slots is removed.

2. Clean the device with a damp cloth.

3. Use the device without food.

► When using the device for the first time, there may be a slight odor and a little smoke.

Therefore, at first, operate the device at least 3 times without food, at the highest level

in a well-ventilated room.

1. Check that the crumb tray is placed.

2. Completely unwind the power cord and insert the plug into socket.

1. Place the toast or bread slice into the toast slot.

2. Change the setting the degree of roasting with the rotary knob. You can set the

degrees from left (light) to right (dark) in 5 levels.

3. Push the lever down until it clicks into place. The

and the toasting operation starts.

► The lever only latches when the plug is inserted into socket.

Warning

Please note

cancel button is illuminated

Inhaltsverzeichnis