Commissioning; Safety Information; Delivery Scope And Transport Inspection; Unpacking - CASO DESIGN Classico T 2 Original Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

► Do not attempt to dislodge food when toaster is plugged in.

Never use metal utensils to free food from toaster slots.

► Do not modify the plug in any way. If an extension cord is

used, it should be a grounding 3-wire cord.

► Unplug the device before cleaning, in the event of

malfunctions and when it is not in use.

12 Commissioning

This chapter provides you with important safety notices during the initial commissioning of

the device. Observe the following notices to avoid dangers and damages:

► Packaging materials may not be used for playing. There is a danger of suffocation.

As a rule, the toaster is delivered with the following components:

● Toaster ● Bun warmer ● Crumb tray

► Examine the shipment for its completeness and for any visible damages.

► Immediately notify the carrier, the insurance and the supplier about any incomplete

shipment or damages as a result of inadequate packaging or due to transportation.

To unpack the device, proceed as follows:

Remove the device out of the carton and remove the packaging material.

The packaging protects the device against damages during transit. The packaging

materials are selected in accordance with environmentally compatible and

recycling-related points of view and can therefore be recycled.

Returning the packaging back to the material loop saves raw materials and reduces the

quantities of accumulated waste.

Take any packaging materials that are no longer required to "Green Dot" recycling

collection points for disposal.

Danger

Warning

Please note

● Operation Manual

Inhaltsverzeichnis