Operating The Fsa System Software; Speed Symbols; Software-Installation - Bosch FSA 760 Edition Originalbetriebsanleitung

en 24 | FSA 760 Edition | Operation
5.8

Operating the FSA system software

The FSA system software can be operated using the
touch screen, the PC keyboard, the USB mouse or the
remote control, including the function buttons and keys.
i
Please note that:
$
the keyboard must always be connected to
the PS2 socket on the remote‑control receiver.
$
the channel setting must always be configured
first before operating the remote control.
List of buttons and hardkeys on the keyboard and remote control
Function
Display online help for current test step.
End current measurement or program.
Change from any Bosch application to the diagnostics software selection (DSA).
You can use the DSA to call up the various Bosch applications and enter customer data, for
example.
One step back.
One step forward or confirm the information.
Move to different buttons, registers or input fields.
Move within a button, a register or a list field.
Prints out a copy of the current screen display on a protocol printer at any point
in the program.
Exception: online help
1. Right click with the mouse.
2. Select "Print".
One step forward or confirm the information.
5.9

Speed symbols

When measuring speed, the FSA system software
selects the best speed source automatically. The
selected speed source is displayed in the status bar on
the screen.
Clamp 1 or TD/TN
Trigger clamp
Clip‑on sensor
Battery ripple
1 689 989 298 | 2017-03-08
The ESC and <F1> to <F12> function keys are hardkeys
and softkeys:
R
Hardkeys (<ESC>, <F1>, <F10>, <F11> und <F12>)
are buttons with permanent functions. These keys
retain the same functions in all program steps.
R
Softkeys (<F2> to <F9>) are keys with alternating
functions. The functions for these keys change
depending on the selected test step.
The softkeys are described in the Online Help.
R
If a hardkey or softkey is "greyed out" in a program
step, it has no function.
R
You can select hardkeys and softkeys using the
mouse, keyboard or remote control.
Information on how to operate the FSA system software
is available in the Online Help.
Remote control
F1
O
J
Z
V


D
E
Current clamp
5.10 ESI[tronic] 2.0
i
Each current version of ESI[tronic] 2.0 is included
in the scope of delivery of the DVD. Before you can
operate ESI[tronic] 2.0, you must first install and
license the software.
5.11 Software installation
Perform software installation via the diagnostics
software access (DSA). Note installation information on
each respective CD/DVD.
Keyboard
<F1>
<ESC>
<F10>
<F11>
<F12>
TAB button
Cursor buttons
Print button
Enter button
Robert Bosch GmbH