Panasonic CF-VDM731 Bedienungsanleitung Seite 9

When writing to discs
Using the CD-ROM of the writer software (included), install the application software on
your computer. For information on how to install the software, refer to the included
manual of the writer software. (
Be sure to use discs conforming to the proper write speeds. (
If the write operation is to involve a long period of time, be sure to connect the AC
adaptor. If the battery power runs low and the power of the computer is cut, the write
operation may end in failure.
Be sure to use discs that meet the following specifications.
DVD-R for General Ver.2.0 (4.7 GB)
DVD-R for General Ver.2.0/4X-SPEED DVD-R REVISION 1.0 (4.7 GB)
DVD-RW Ver.1.1 (4.7 GB)
DVD-RW Ver.1.1/2X-SPEED DVD-RW REVISION 1.0 (4.7 GB)
DVD-RAM Ver.2.0 or Ver.2.1 (4.7 GB/9.4 GB)
In the case of DVD-RAM, only non-cartridge discs or removable cartridge discs can be
used.
Depending on the disc, the quality of the write operation may not be so good. We recom-
mend using any of the following discs.
Recommended Discs:
<CD-R>
HITACHI MAXELL, Ltd.
MITSUBISHI CHEMICAL Co., Ltd.
MITSUI CHEMICALS, Inc.
RICOH Co., Ltd.
TAIYO YUDEN Co., Ltd.
<CD-RW/High-Speed CD-RW>
MITSUBISHI CHEMICAL Co., Ltd.
RICOH Co., Ltd.
<DVD-R>
Matsushita Electric Industrial Co., Ltd.
PIONEER VIDEO CORPORATION
TAIYO YUDEN Co., Ltd.
MITSUBISHI CHEMICAL Co., Ltd.
<DVD-RW>
TDK Corporation
Victor Company of Japan, Limited
<DVD-RAM>
Matsushita Electric Industrial Co., Ltd.
HITACHI MAXELL, Ltd.
Ultra-Speed CD-RW (US CD-RW) cannot be used.
DVD Multi Driver/B's Recorder/B's CLiP Booklet)
page 11)
E
9