Panasonic CF-VDM731 Bedienungsanleitung Seite 8

Using the Drive
Information
To play DVD-Video or MPEG2 files, install the DVD playback software (included).
For information on how to install the software, refer to the instructions of the software.
( WinDVD
<Using PC Cards>
If the PC Card does not work, there may be no interrupt request (IRQ) line available.
Deactivate unnecessary equipment using in the Setup Utility.
When using CD-R or CD-RW discs, read the descriptions written on the disc package.
When playing back movies from a disc, note that smooth playback may not be possible in
some cases.
E
About Regions Setting
The DVD-Video has a region code that is fixed according to the region where it is sold. In
order to play a DVD-Video, the region code of the player software and of the drive must
match that of the DVD-Video.
<Example>
For U.S.A. and Canada: "1"
For Europe: "2"
This drive's region code is not set at the time of shipment from the factory. Therefore,
operations will differ depending on the first DVD-Video played.
In the case of a DVD-Video with a specific region code:
The drive will automatically be set with the same region code as the DVD-Video.
In the case of any other DVD-Video:
[Confirm Region] appears. Select region code and select [OK]. Play now begins.
([Confirm Region] may not be displayed for some DVD-Videos. To confirm the current
region code and the number of settings remaining, right-click on the WinDVD screen
and select [Setup] - [Region].)
CAUTION
The region code can be set a total of five times, including the initial setting. Proceed
very carefully, because after the fourth change has been made, the region code set
last is fixed and no further changes can be made.
The user must take responsibility for any trouble that results from illegally changing
or altering the region code.
NOTE
[Confirm Region] will also be displayed if a DVD-Video with one region code is
inserted into a drive for which another region code has already been set.
8
TM Booklet)