Makita GF600 Betriebsanleitung Seite 6

ENGLISH (Original instructions)
1. Battery cartridge
2. Fuel cover
3. Trigger
4. Indication lamp
5. Pusher button
6. Pusher lever
7. Magazine
8. Contact element
SPECIFICATIONS
Nail length
Nail capacity
Dimensions (L x W x H)
Net weight
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications and battery cartridge may differ from country to country.
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
...... Read instruction manual.
.................. Container under pressure, keep away
from temperatures over 50°C (for ex.
sun radiation). Keep container in a well
ventilated place.
................. Use only outside or well ventilated
rooms. Do not breathe gas.
................. Do not use near flames or sprays on
heated surfaces. In use, may form
flammable/explosive vapour-air
mixture.
................. Do not damage, puncture or burn even
after use.
.......... Wear safety glasses.
.......... Wear ear protection.
................... Keep fingers away from trigger when
not driving fasteners to avoid accidental
firing.
................. Use only in ventilated area to avoid
nausea and unconsciousness. Never
use tool in combustible atmospheres.
6
Explanation of general view
9. Lamp
10. Exhaust vent
11. Button
12. Lamp button
13. Metering valve
14. Cap
15. Jet nozzle
16. Adjuster
Model
Nail Gauge 16Ga: 15 mm - 65 mm
END107-8
................... Do not use on scaffoldings, ladders.
................... Warning: hot surface!
Cd
Ni-MH
Li-ion
Intended use
The tool is intended for fastening on interior work and
furniture work.
The tool is for high-volume professional application only.
Do not use it for any other purpose. It is not designed to
drive fasteners on a hard surface like steel and concrete.
17. Hook
18. Nose adapter
19. Short nail adapter
20. Bolt
21. Latch
22. Door
23. Filter cover
24. Filter
GF600
100 nails (2 strip)
266 mm x 90 mm x 305 mm
2.2 kg
D.C. 7.2 V
The tool exhaust may ignite flammable
materials.
Do not touch around this symbol.
Touching the surface may cause burns
or injuries.
............. Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of the European
Directives, on Waste Electric and
Electronic Equipment and Batteries
and Accumulators and Waste Batteries
and Accumulators and their
implementation in accordance with
national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be
collected separately and returned to an
environmentally compatible recycling
facility.
ENE073-3