Installation; Safety Instructions - Atag DW7114OXB Gebrauchsanweisung

Installation

596

Safety instructions

Connections to electricity, water and drainage must be performed by a qualified professional.
Always follow applicable regulations for water, drainage and electricity.
Take care during installation! Wear protective gloves! There must always be two people!
Place a drip tray on the floor beneath the dishwasher to prevent damage from any water leaks.
Before screwing the dishwasher into place, test the dishwasher by running the Rinse & hold
program. Check that the dishwasher fills with water and drains. Check also that none of the
connections leak.
WARNING!
Turn off the water supply when installing the dishwasher!
The plug must be disconnected or power to the socket turned off while the work is carried out!
36
*Remove the locking nuts when installing in a recess measuring 820-821 mm.
1198
559
50 30-94
[mm]
Nominal dimensions. Actual measurements may vary.