Single Unit Operation; Front Panel Indicators - TDK-Lambda HFE1600 Serie Bedienungsanleitung

CHAPTER 3:
3.1

Front Panel Indicators

1. DC OK – LED indicator:
GREEN
RED
2. AC OK – LED indicator:
GREEN
OFF
When inserting a power supply into the rack, do not use unnecessary force; Slamming the power supply into the rack
can damage the connectors on the rear of the supply and inside the rack.
Power supplies are factory programmed to the rated output voltage. For applications requiring lower / higher voltage,
power supplies should be adjusted to the required voltage before connection to the load.

SINGLE UNIT OPERATION

Output Voltage is above 90% ± 5% of set Output Voltage.
Output Voltage is below 90% ± 5% of set Output Voltage.
Input Voltage (Vin) is in the range of 85Vac to 270Vac.
Input Voltage (Vin) is below 85Vac or above 270Vac.
Figure 3–1: Front Panel Indicators
CAUTION:
ATTENTION:
- 10 -