Maintenance - Makita HP2030 Betriebsanleitung

Hammer drilling (Fig. 6 & 8)
When drilling in concrete, granite, tile, etc., turn the
x
action mode change lever to the position of sym-
bol. Be sure to use a tungsten-carbide tipped bit.
Drilling (Fig. 6 & 8)
When drilling in wood, metal or plastic materials, turn
M
the action mode change lever to the position of
symbol.

MAINTENANCE

CAUTION:
Always be sure that the tool is switched off and
unplugged before carrying out any work on the tool.
To maintain product safety and reliability, repairs,
maintenance or adjustment should be carried out by
a Makita Authorized Service Center.
6