Iberital L’ANNA Installations- Und Betriebshandbuch Seite 42

IBERITAL
8) In the case of anomalies or irregular operation, disconnect the machine prior to carrying out any maintenance
work. Contact the technical personnel authorized by the manufacturer.
Repairs to the machine will be carried out by the manufacturer or an authorized after-sales service centre, using
only original spare parts.
If these conditions are not met, the machine will pose a danger.
The connection to the power supply must be made via a switch which meets local safety standards.
9) The electrical supply cable for the machine must be connected to a switch with a minimum separation between
contacts of 3 mm. This switch must be covered by an omnipolar circuit breaker.
10) In order to keep the power supply cable from overheating, ensure that it is totally extended.
11) The mains water pressure to which the coff ee machine must be connected must be between 0.6 MPa and
0.8 MPa.
12) The machine is only suitable for installation in places where its use and maintenance are restricted to qualifi ed
personnel.
13) The machine must be installed in a horizontal position, and must NEVER be submerged in water or any other
liquid.
14) The power supply cable must not be repaired or replaced by the user. Should the cable become damaged,
disconnect the machine from the power supply and contact qualifi ed technical personnel authorized by the
manufacturer.
15) Disconnect the machine from the power supply when it is not going to be used for an extended period of time.
16) The average level of surface sound pressure is 71dB ± 7dB and the average sound power is 86dB ± 9 dB.
17) The machine must be installed so that its highest surface is no less than 1.5 metres from fl oor level.
18) In order to access the maintenance section of the machine, no access or unlocking tools are required. The steps
to follow are:
- Remove the cup tray.
- Remove the main drainage tray.
Access to the service area of the machine is only permitted for people with practical experience and knowledge
of the appliance, and in particular with regard to aspects of hygiene and safety.
19) This appliance is not designed to be used by persons (including children) whose physical, sensory or mental
capacities are reduced, or who lack experience or knowledge, except when they have had supervision or
instructions related to the use of the appliance by a person responsible for their safety.
20) Children must be supervised to ensure that they do not play with the appliance.
21) In order to guarantee that the machine works correctly, it is essential to respect the manufacturer's instructions
and make sure that authorized personnel carry out maintenance work. In particular, safety devices should be
checked periodically.
22) Do not go near the metal parts of the hot water and steam dispensers and the feed groups with bare hands or
other parts of the body.
23) The water and steam emitted by the ejectors is extremely hot and can scald.
24) The metal parts of the water and steam ejectors, together with the feed groups, are extremely hot under
normal working conditions. They must be used with care and held only by the protected parts or with the handle
or hand grip.
25) Make sure that the coff ee cups are completely dry before placing them on the cup warmer. Only crockery
specifi c to this machine may be used with the cup warmer. For any queries, contact your sales centre. The
Page 42
Downloaded from www.Manualslib.com manuals search engine
INSTALLATION AND OPERATION MANUAL