Power Supply Connections - Eneo TPD-62V2812P0A Betriebsanleitung

CAUTION:
Extreme care should be taken NOT to scratch the bubble dome
surface while the camera installing or adjusting.
Extreme care should be taken NOT to apply force to IR LEDs.
Care should be taken the cable is NOT to be damaged, kinked or
exposed in the hazardous area.
Do not expose the camera directly to a strong light source such
as the sun or spot light..

Power supply connections

Camera can be operated with the regulated or unregulated 12VDC but the regulated
power supply of 12VDC is recommended. Camera is protected from the damage by the
reverse connection of polarity.
10
VIDEO (BNC)
Power