T-COM Sinus 154 DSL Basic SE Kurzanleitung Seite 11

Sinus 154 DSL Basic SE / englisch / A31008-E515-A105-2-7K19 / QIG_154_DSL_BasicSE.fm / 12.07.2004
Configuring the encryption and accesses
The first encryption configuration must be performed on a computer which has a wired connection.
WEP encryption
Set the WEP operating state to Ein.
Create the key either automatically or manually.
Automatic:
– Select Schlüsselwort.
– Enter 1–32 characters in the field.
– Click on Schlüssel generieren.
Manual:
– Do not select Schlüsselwort.
– Select the key length (64 bit or 128 bit)
– Enter 1–4 characters.
(for 64-bit key: 10 hexadecimal characters, for 128-bit key: 26 hexadecimal characters).
Select the Standard Schlüssel Nr. of the key that you are using at present.
Do not forget to note the value for the selected key before saving it. You will need this value in order to
configure the wireless network adapter.
Click on OK & Weiter.
MAC access control
Name the computers which are to be given wireless access to your network. You will need the MAC address
(physical address) of each individual computer.
Open the prompt on the computer you're working on.
Enter ipconfig /all and press Enter.
Note the physical address.
Enter this address in the MAC filter table.
Activate the Ein option in the MAC filter table.
When you have made all the entries, click on OK & Weiter.
Click on OK & Weiter several times to terminate the configuration.
Read the detailed user guide on CD-ROM.
The system will now attempt to create an Internet connection to www.telekom.de in a second browser window.
Please note that this may take some time.
The homepage of the configuration program appears in the first browser window again.
When an Internet link has been created, the Online LED lights up. If no Internet link could be created,
consult the detailed instructions on the CD-ROM to find a possible cause.
Deutsche Telekom AG, T-Com, SNo.: A31008-E515-A105-2-7K19 , MNo.: 40209457, Release: July 2004
English