Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Maintenance
The machine's motor has life-time lubrication and requires
no special maintenance. However, should you operate the
machine on a continuous basis over long periods of time
we recommend that you send us the machine for thorough
cleaning and an inspection. This will spare you unnecess-
ary repair expenses and increase the machine's service
life. If you always clean the ventilator of dust after each
operation, the motor will enjoy an ever longer service life.
Uniform ventilation is essential for a long service life.
Replacing carbon brushes
Our service personnel will do this and all other servicing
work fast and professionally.
Mains cable
Damaged mains cables must not be used. They are to be
replaced immediately.
This has been made very straightforward by the new mains
cable module (6). Press both locking keys (7) and pull the
mains cable module (6) out of the handle. Insert the new
mains cable into the handle and lock in place. Different
lengthed mains cables are available as special accessories.
Only use the mains cable module for KRESS power tools!
Do not attempt to operate other electrical appliances
with it!
Auxiliary handle
For safety reasons, the supplementary handle must always
be used when working with the percussion drilling ma-
chine. It allows safe, wander-free guidance of the drill and,
thanks to an integrated depth stop, precise adjustment of
the drilling depth.
Ensure that the draw spindle is properly tightened to
the auxiliary handle. Only in this way can you prevent
the auxiliary handle from twisting on the collar or beco-
ming detached from the equipment.
Supplied accessories
Auxiliary handle with depth stop
Noise/vibration information
Measured values correspond with EN 50144.
Sound pressure level:
Sound power level:
Work place
emission value:
Operators require noise protection equipment.
The weighted acceleration is typically 13.2 m/s
Environmental protection
Kress takes back used machines for resource saving re-
cycling. Due to their modular construction Kress machines
can be very easily broken down into their recyclable basic
materials. Hand in your old Kress machine at a dealer or
send them directly to Kress.
Subject to change without notice.
+3
1050 SXC
=
74
+3
800 SX
=
78
+3
1050 SXC
=
87
+3
800 SX
=
91
+3
1050 SXC
=
77
+3
800 SX
=
81
2
.
dB (A)
dB (A)
dB (A)
dB (A)
dB (A)
dB (A)
Werbung
