Overview; Starting Operation; Overhead Installation - EuroLite N-200 Bedienungsanleitung

Overview

STARTING OPERATION

Install the device on a plane surface.
The fluid tank of the device needs to be filled with smoke fluid before starting up operation and always
disconnected from the mains as fluid could be spilled.
Only use quality smoke fluids available at your dealer. We recommend high-quality Eurolite smoke fluids (e.
g. Smoke fluid -P2D- professional 5l). You must not use substances that are classified as "dangerous
working material" or "inflammable fluids".
Always make sure there is sufficient liquid in the fog liquid tank.
If fluid should get into the interior of the device, disconnect from mains immediately and consult a technician.

Overhead installation

Install the device in a well-ventilated area. The operation in an unsufficiently ventilated room can lead to a
condensation of the smoke fluid. The resulting slippery surface can cause accidents. Keep a minimum
distance of 20 cm around and above the device.
Furthermore do not orientate the escape nozzle directly in the direction of the audience's eyes. In order to
create a good effect, there should be a distance between the device and the audience of at least 1.5 m.
(9) Remote control
(10) ON/OFF switch
(11) Fuseholder
(12) Power supply
(13) Fluid hose
14/18
(1) Remote control
(2) Escape nozzle
(3) Carrying handle
(4) Attachment eyelet
(5) Fluid tank
(6) Mounting bracket
(7) Fixation screws
(8) Housing
00096813.DOC, Version 1.0