Product Disposal - Zelmer ZIR0500 Benutzerhandbuch

Troubleshooting
Problem Possible cause
Connection problem
Soleplate is not
heating even
though iron is
turned on.
Temperature control is in "min"
position
Not enough water in tank
Steam control is selected in non-
Iron does not
steam position.
produce steam
Selected temperature is lower than
that specified to use with steam.
Steam jet function was used very
frequently within a short period.
Steam jet and
vertical steam jet
function does not
work
Iron is not hot enough
The iron is The temperature setting is too low
leaking to produce steam.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and electronic
devices, known as WEEE (Waste Electrical and Electronic Equipment), provides the legal
framework applicable in the European Union for the disposal and reuse of waste electronic
and electrical devices. Do not dispose of this product in the bin, instead going to the electrical
and electronic waste collection centre closest to your home.
We hope that you will be satisfied with this product.
Solution
Check main power supply cable plug and
outlet.
select adequate temperature
Fill water tank
Set steam control between positions of
minimum steam and maximum steam
(see "iron chart").
Select a higher temperature
Put iron on horizontal position and wait
before using steam jet function.
Adjust to higher temperature to steam
ironing. Put iron in vertical position and
wait temperature indicator light becomes
fixed.
The variable steam knob must be set on
"0" position until the iron is hot.
EN PL
13