Test pressure: 1,6 MPa Spare parts (see page 12) (1 MPa = 10 bar = 147 PSI) XXX = Colors Hot water temperature: max. 70°C 000 = Chrome Plated Recommended hot water temp.: 65°C 800 = Stainless Steel Optic Thermal disinfection: max. 70°C / 4 min Operation (see page 9) • Safety against backflow • The product is exclusively designed for drinking Hansgrohe recommends not to use as drinking water water! the first half liter of water drawn in the morning or after a prolonged period of non-use. Fault Cause Remedy Mixer stiff - Cartridge defective, calcified - Exchange cartridge Mixer dripping - Cartridge defective - Exchange cartridge Water escaping at the threaded - connection hoses not completely - Tighten connection hoses by hand base...